Key Features:

Only (8) sets of clamps to cover entire range.

A. One mandrel covers entire range.

B. Single point attachment allows preps on all wall thicknesses at any angle.

C. Optional cross feed for flange facing, pipe grooving and severing.

D. EscoLock blade locking system for maximum blade life.

E. Dual opposed tapered roller bearings deliver rock solid performance.

F. Heavy duty clamping system does not break.

G. Directional exhaust.

H. Low R.P.M. with tremendous torque.

I. Produces thick chips on all highly alloyed tube and pipe without cutting fluids.

All you have to do is measure the tube I.D., select the correct ribs and/or pads and install them on the mandrel. Because they self align, that's all there is to it.

Now insert the mandrel into the tube I.D., expand the clamp ribs and/or pads and perform your end preps in seconds.

Specifications Prepzilla MILLHOG

Working Range: 1.575" (40 mm) I.D.to 8 .625" (219.1 mm) O.D.

Motor, pneumatic/electric: 2 h.p. (1.492 kw)

Air Pressure: 90 psi. (6.2 bar)

Air Volume: 80 cfm (2690 It/min.)

Speed: 30 RPM

Minimum Clearance: 8 3/4" (222.3 mm)

Head Length: 19 3/4" (501.7 mm)

Working Weight: 40 lbs. (18.2 kg)

Shipping Weight: 110 lbs. (50 kg)

Shipping Dimensions: 27” x 21” x 7” (686 mm x 534 mm x 178 mm)

Prepzilla Clamp/Rib Selector Chart

Download Page